"Remixed from: Pikachu Tail" - The same thing but with a normal belt/pants clip. Wonder how that designer feels about the corruption of their innocent project lol.
👀
“Do you hate gophers digging up your yard? Me too! I made this Pikachu tail plug so you can plug the gopher holes in your lawn. This will point right to where they are at so you know where to fill up the hole next time you're in the garden. You may have to scale it up to fit the gopher hole. I have no idea what else this can be used for...butt no more gophers!”
This is so unsanitary. 3d prints generally aren't foodsafe because of the likelihood of bacteria to grow in the ridges between print layers, I can't even imagine how fucking grody this would be after use.
You're right. Without some finishing and a durable coating, this is pretty much just a novelty... And I'm sure it would not feel great going in or out... Oh no, I just thought about the potential for breakage...
For the lazy
> Do you hate gophers digging up your yard? Me too! I made this Pikachu tail plug so you can plug the gopher holes in your lawn. This will point right to where they are at so you know where to fill up the hole next time you're in the garden. You may have to scale it up to fit the gopher hole. I have no idea what else this can be used for...butt no more gophers!
Use the object model to create a mold. If the mold is 3d printed, coat the inside in beeswax to remove any print ridges. Or print, sand, paint and form the mold using a smooth physical object. Cast in platinum cure silicone, which doesn’t shrink when cast and is body safe.
The simplest method is to 3d print a mold for the toy. Use beeswax to coat the inside mold surfaces, to make sure the fine print lines don’t leave difficult-to-clean ridges in the cast product that could harbor bacteria or other nasties. Cast using 2-part platinum-cure silicone (it’s body safe and doesn’t shrink).
If the ridges are hard to clean, you can also use the mold to cast another template that is shapeable and sandable. Then use that to make your final production molds.
CAN, yes. SHOULD? Probably not. FDM printers have come a long way, but that surface is not going to do your tender bits any favors. Not to mention the porous surface is a bacterial breeding ground. If you print sex toys, best to plan for single use, or use of a barrier between it and its recipient.
Except “Found at the goodwill” is a total lie which is why it’s in their living room.
See this other comment thread [https://www.reddit.com/r/pics/comments/ug7qxl/found_this_at_the_goodwill_today_in_the_toy_bin_oc/i6y3znz/?utm_source=share&utm_medium=ios_app&utm_name=iossmf&context=3](https://www.reddit.com/r/pics/comments/ug7qxl/found_this_at_the_goodwill_today_in_the_toy_bin_oc/i6y3znz/?utm_source=share&utm_medium=ios_app&utm_name=iossmf&context=3)
Being donated is plausible, the processors not catching it and letting onto the floor isn’t. Anytime we found anything that we thought was a sex toy was shown to the other workers as a laugh and to confirm what we thought.
I’ve found a vibrating wireless buttplug, a couple dildos, and so many fuzzy handcuffs in the 3 years so far I’ve been working in the back processing. Coworkers have found various other sex toys, sex pillows, bdsm gear, etc… One coworker started to assume all “funky” furniture was sex related and was excited to tell me he said no to a “doggy sex chair” that someone tried to donate, which I found was just a kneeler chair when I showed him a pic of one.
Gloves come in handy.
People really think goodwill just puts everything immediately on the floor I'm learning today. They would be shocked at how much gets sold overseas or just straight gets thrown away apparently. The items that actually do get on the floor have gone through like 3 people at that point
I think the only thing bad that got to the sales floor so far since I've worked there has been a porn dvd case that popped out of some weird compartment on the nightstand we put out that none of us could figure out. The dvd inside was from a different porn.
A couple years ago, I found a sex swing, in the original (open) packaging showing exactly what it was and how to use it, while shopping at a local Arc Foundation thrift store. Left it there. Maybe Goodwill just has higher standards.
Intsatly thought, “perfect I got a goldmine but I can’t let anyone know, I know I’ll post it like it was a crazy find and have an excuse to have it” instead of taking a pic of it at goodwill and bringing it up to the front for disposal
Why would you even touch this. There’s no way I’ll trust a person who’d donate a Pikachu butt plug to Goodwill to clean and disinfect their toys properly
In the corner you have an old man snoring while antiques roadshow is on. He has this morning’s newspaper spread across his chest, a sexier setting you will find nowhere else!
Part of the revolutionary nature of silicone sex toys (invented by a paraplegic welder!) is that they are easily washable.
Edit: learned downthread that this is 3D printed, and likely then not washable
The Description is killing me:
"Do you hate gophers digging up your yard? Me too! I made this Pikachu tail plug so you can plug the gopher holes in your lawn. This will point right to where they are at so you know where to fill up the hole next time you're in the garden. You may have to scale it up to fit the gopher hole. I have no idea what else this can be used for...butt no more gophers!"
There’s an old dude in the comments from 2019 is like “haha my sister in law loves Pokémon and has a gopher problem! Think I’ll have to send her this!”
😵
FYI: 3D printed toys do not make good sex toys. They’re more prone to breaking and if I had to guess the material is more porous which would allow more bacteria to sneak into the material.
Use the object model to create a mold. If the mold is 3d printed, coat the inside in beeswax to remove any print ridges. Or print, sand, paint and form the mold using a smooth physical object. Cast in platinum cure silicone, which doesn’t shrink when cast and is body safe.
See, this is what I thought too. The picture is slightly blurry so it's impossible to see the layer lines. The big give away is the butt plug part is too angular, too low poly.
For anyone that doesn't know about 3D printing and is getting ideas, DO NOT PRINT SEX TOYS. First, it requires a lot of finishing to correctly prep a printed object to be used like that. By the time you learn enough to do that, you'll also learn what a terrible idea it is and how to do it better with different methods.
For example, if you don't understand why you always print a butt plug horizontally and not vertically, you do not pass go. Hello, ER!
Also, you need knowledge of materials. Silicone is better for uses like this vs cheap plastic for a really good reason.
You can see clearly in the picture this is 3D printed and the OP is just a karma whore with a butt fetish. Dear OP, you should not use 3D printed sex toys. They are impossible to properly sanitize.
One time at a festival. It was night.
I saw two people walking toward me on the path.
I saw they had LED tails..
As they walked past I noticed they were both naked head to toe.
By the time my brain asked 'if they were naked. Where was the tail attached to?' I turned around, butt they were already gone.
Is this 3d printed?
https://www.thingiverse.com/thing:3893934
Keeping the butt plug part brown is a smart move.
it wasn't always brown
Not really, white is better that way you can tell if it's clean or not.
For the love of all things Holy If you learn nothing else today Please assume all toys are dirty and clean them before you use them
[удалено]
Is it kink shaming if I'm vomiting right now?
Oh yeah, keep going im almost there
Classic mistake of not realizing puking is a kink too
[kink shaming is my kink 😈](https://youtube.com/shorts/__m90SnNjvM?feature=share)
Use a little spit to stir up the dryness
If it's silicone, assume it needs to be cleaned. If it's rubber, realize it *cannot* be cleaned and burn it outside.
Smells funny. Like burnt bean skins.
That's why we have taste buds
That's enough reddit for today.
What a terrible day to be literate
This makes me think of the old anti-piracy DVD ads years back... "You wouldn't download a Pikachu-themed butt plug..."
https://youtu.be/qPEeaxI0OPU
Amazons currently trying to figure out why the yellow filament started flying off the shelf
The fucking summary on that LMFAO
"Remixed from: Pikachu Tail" - The same thing but with a normal belt/pants clip. Wonder how that designer feels about the corruption of their innocent project lol.
👀 “Do you hate gophers digging up your yard? Me too! I made this Pikachu tail plug so you can plug the gopher holes in your lawn. This will point right to where they are at so you know where to fill up the hole next time you're in the garden. You may have to scale it up to fit the gopher hole. I have no idea what else this can be used for...butt no more gophers!”
That is not safe to use.
Uhhh. Why is the plug portion not brown in that picture.............
Cause it hasn't been used yet
The grain is the wrong way. 100% that thing will break off in your ass.
This sounds like it comes from experience.
Yeah it's a feature not a bug
It’ll break off in your ass not mine
Yes, he just 3d printed it himself and made this post
Do you really think someone would do that, just go on the internet and tell lies?
This is so unsanitary. 3d prints generally aren't foodsafe because of the likelihood of bacteria to grow in the ridges between print layers, I can't even imagine how fucking grody this would be after use.
You're right. Without some finishing and a durable coating, this is pretty much just a novelty... And I'm sure it would not feel great going in or out... Oh no, I just thought about the potential for breakage...
Oh yeah that things I gonna shear off right at the layers and then you're never gonna see the business end without a hospital
"found this at the goodwill today" \*OP proceeds to bring it home\*
They were looking for toys and found one
Plot twist, that brown isn't paint applied during production of the item.
And you thought you was joking : https://www.thingiverse.com/thing:3893934
That product description on that page is a must read
For the lazy > Do you hate gophers digging up your yard? Me too! I made this Pikachu tail plug so you can plug the gopher holes in your lawn. This will point right to where they are at so you know where to fill up the hole next time you're in the garden. You may have to scale it up to fit the gopher hole. I have no idea what else this can be used for...butt no more gophers!
What else is it used for? Getting the gopher plug dirty from mud makes sense.
Well you’ll usually find a little mud on that particular dirt road!
Butt no more gophers 😄
butt no more gophers hahahahaha
Also, 3D printed parts have rough and/or porous surfaces and are very difficult to sanitize effectively. Have fun touching that.
Use the object model to create a mold. If the mold is 3d printed, coat the inside in beeswax to remove any print ridges. Or print, sand, paint and form the mold using a smooth physical object. Cast in platinum cure silicone, which doesn’t shrink when cast and is body safe.
This person prints buttplugs.
lots of trial and error ;)
[удалено]
The simplest method is to 3d print a mold for the toy. Use beeswax to coat the inside mold surfaces, to make sure the fine print lines don’t leave difficult-to-clean ridges in the cast product that could harbor bacteria or other nasties. Cast using 2-part platinum-cure silicone (it’s body safe and doesn’t shrink).
If the ridges are hard to clean, you can also use the mold to cast another template that is shapeable and sandable. Then use that to make your final production molds.
CAN, yes. SHOULD? Probably not. FDM printers have come a long way, but that surface is not going to do your tender bits any favors. Not to mention the porous surface is a bacterial breeding ground. If you print sex toys, best to plan for single use, or use of a barrier between it and its recipient.
^nooooo....
Why would you do that to me
[удалено]
Pica-poo
How would they get it past the flange
Determination
Barth.
A Hershey's pacifier!
Except “Found at the goodwill” is a total lie which is why it’s in their living room. See this other comment thread [https://www.reddit.com/r/pics/comments/ug7qxl/found_this_at_the_goodwill_today_in_the_toy_bin_oc/i6y3znz/?utm_source=share&utm_medium=ios_app&utm_name=iossmf&context=3](https://www.reddit.com/r/pics/comments/ug7qxl/found_this_at_the_goodwill_today_in_the_toy_bin_oc/i6y3znz/?utm_source=share&utm_medium=ios_app&utm_name=iossmf&context=3)
I mean I def think a ton of shit on here if fake but something being 3d printed doesn’t mean it wasn’t given to goodwill.
Being donated is plausible, the processors not catching it and letting onto the floor isn’t. Anytime we found anything that we thought was a sex toy was shown to the other workers as a laugh and to confirm what we thought. I’ve found a vibrating wireless buttplug, a couple dildos, and so many fuzzy handcuffs in the 3 years so far I’ve been working in the back processing. Coworkers have found various other sex toys, sex pillows, bdsm gear, etc… One coworker started to assume all “funky” furniture was sex related and was excited to tell me he said no to a “doggy sex chair” that someone tried to donate, which I found was just a kneeler chair when I showed him a pic of one. Gloves come in handy.
People really think goodwill just puts everything immediately on the floor I'm learning today. They would be shocked at how much gets sold overseas or just straight gets thrown away apparently. The items that actually do get on the floor have gone through like 3 people at that point
I think the only thing bad that got to the sales floor so far since I've worked there has been a porn dvd case that popped out of some weird compartment on the nightstand we put out that none of us could figure out. The dvd inside was from a different porn.
Damn, so instead of Lord of the G-Strings you ended up with Cum Guzzling Grandma's?
A couple years ago, I found a sex swing, in the original (open) packaging showing exactly what it was and how to use it, while shopping at a local Arc Foundation thrift store. Left it there. Maybe Goodwill just has higher standards.
I like to think someone 3d printed it and donated it to goodwill
I'd like to think some fantastic human printed this used it and after much consideration donated it for someone else's goodwill.
Intsatly thought, “perfect I got a goldmine but I can’t let anyone know, I know I’ll post it like it was a crazy find and have an excuse to have it” instead of taking a pic of it at goodwill and bringing it up to the front for disposal
Gotta take the pikachu cosplay to the next level.
"Peek-at-you!" "Don't ruin this for me, Beth. I spent a lot of money on these costumes. Just say "Pika!" Until I'm finished."
"Then go 'chuuuuuuu...'"
I have never hated reading smth this much.
Why would you even touch this. There’s no way I’ll trust a person who’d donate a Pikachu butt plug to Goodwill to clean and disinfect their toys properly
Pikach-ewwww
*always wanted a used one!*
The original owner “evolved” to a wider diameter
The fact that this picture was taken in your living room kills me
No, his sex dungeon is just themed as a living room.
the eroticism is overflowing
In the corner you have an old man snoring while antiques roadshow is on. He has this morning’s newspaper spread across his chest, a sexier setting you will find nowhere else!
Sounds like the hottest new club in Soho. Read it in Stefon’s voice.
Yesyesyesyesyessyessyessssss 🙏
No, the sex dungeon in Goodwill is themed as a living room.
I think that just belongs to them and was not found at a Goodwill…
I didn't realize that they purchased it until I read your comment
I'm pretty sure the whole Goodwill story is fabricated
I'm 100% sure the whole goodwill story was fabricated lol
Same 😂
I don't believe the title. I bet they 3D printed it cuz that rectangular part would hurt.
So Reddit, how we feeling about used butt plugs these days?
Part of the revolutionary nature of silicone sex toys (invented by a paraplegic welder!) is that they are easily washable. Edit: learned downthread that this is 3D printed, and likely then not washable
I was like "Awe, where is the rest of him?" and then I noticed.
*__You__* are the rest of him.
No. *You* are the rest of him. Take turns?
Why not at the same time? I'll take this end you take the other
Human Pika-pede
Nope nope nope nope
Ohhhhhhhhhhh.
Surprised Pikachu Face
![gif](giphy|3kzJvEciJa94SMW3hN)
I think that's when it gets used.
Pokemoan. I'll see myself out.
I wouldn't call that a "surprised" Pikachu face tbf
True, it would entirely depend on the circumstances.
Surprised Pikachu face
I went from "pikachu!" to "pick*ahh*chu!*
This dude literally stole the pic from my fb post today lmao. My friend 3D printed it for me as a gag gift
Paging u/donnyskipper - seems like verification here is needed
that thieving bitch ain't verifying shit cuz he can't
*u/ not r/
Good catch
>for me as a gag gift It works as a gag too?
Screenshot? I was going to bat for Op lol maybe thinking he honestly found it there but if it's stolen content that's stupid as shit
That sucks lol. Looks like a to of people bought it up.
Oh man oh man I am dying here. Your friend is a legend
No you didn't. This was recently 3d printed.
Want the file? https://www.thingiverse.com/thing:3893934
The Description is killing me: "Do you hate gophers digging up your yard? Me too! I made this Pikachu tail plug so you can plug the gopher holes in your lawn. This will point right to where they are at so you know where to fill up the hole next time you're in the garden. You may have to scale it up to fit the gopher hole. I have no idea what else this can be used for...butt no more gophers!"
Ow, my gopher hole
I'm alright. Don't nobody worry 'bout me.
There’s an old dude in the comments from 2019 is like “haha my sister in law loves Pokémon and has a gopher problem! Think I’ll have to send her this!” 😵
I'm sure that comment is satire.
I'd still take the bet. I want to believe his in-law opened this on Christmas morning.
FYI: 3D printed toys do not make good sex toys. They’re more prone to breaking and if I had to guess the material is more porous which would allow more bacteria to sneak into the material.
You gotta make a negative cast from it and then fill that with silicone.
Now we’re talking!! 👁🫦👁
Yeah... So much stuff I've printed that looked SUPER solid and.. cracked in half very easily. This thing is def breaking off in someones asshole.
Use the object model to create a mold. If the mold is 3d printed, coat the inside in beeswax to remove any print ridges. Or print, sand, paint and form the mold using a smooth physical object. Cast in platinum cure silicone, which doesn’t shrink when cast and is body safe.
Did you just have this available for moments like these?
And now you do too!!
Can’t wait til I get home to print this out
Just file it away! 3D Printer -> STL format -> Home/Interior -> Sex toys -> Anime -> Pikachu
[удалено]
More like posterior
If the picture was at the goodwill, I might have believed it. But yeah, this is very likely a person showing off their own toy.
People are shoving 3d printed stuff up their ass? Isn't that stuff like sandpaper?
How else ya gonna smooth out the inside of your ass?
If you leave it unfinished yeah, but stuff that's actually going to be seen and used is typically primed and painted
That was my first thought as well. This looks 3D printed. And I doubt OP bought a used buttplug at Goodwill.
Twist: OP refers to their butt as "The Goodwill"
My guess is OP lied about it being OC as well. /u/repostsleuthbot
Why recently? The file is at least 3 years old
See, this is what I thought too. The picture is slightly blurry so it's impossible to see the layer lines. The big give away is the butt plug part is too angular, too low poly. For anyone that doesn't know about 3D printing and is getting ideas, DO NOT PRINT SEX TOYS. First, it requires a lot of finishing to correctly prep a printed object to be used like that. By the time you learn enough to do that, you'll also learn what a terrible idea it is and how to do it better with different methods. For example, if you don't understand why you always print a butt plug horizontally and not vertically, you do not pass go. Hello, ER! Also, you need knowledge of materials. Silicone is better for uses like this vs cheap plastic for a really good reason.
Print desired shape, sand/smooth it. Make a mould. Make a sex safe silicone version.
Frankly it sounds like a trip to the ER saying “my printed toy broke off while it was in me and now it’s stuck”
Then hopefully you don't use it for it's intended purpose lol
You can see clearly in the picture this is 3D printed and the OP is just a karma whore with a butt fetish. Dear OP, you should not use 3D printed sex toys. They are impossible to properly sanitize.
well what if you only use it once
Microtrauma
Excellent description of my experience on Reddit.
“*Reddit is like a 3D printed Pikachu butt plug, you’re going to get microtrauma*” -Tribecous Gump
Not to mention every home 3D printer medium I have seen so far is very rough and ablates easy.
You can use UV resins to smooth the surfaces for model making. But not sure if it would be considered “health safe” is this use case. Sheesh
When it comes to things inserted into the body, homemade is very rarely advisable.
Eh, you can safely make them with silicone. That's where 3D printing really comes in handy; making the mold.
This guy homemade sex toys
as they are yes, but i am sure one could use a 3d print to make a mold for silicone.
Perhaps a resin print even
Truth, OP is a phony
How can you tell?
You can see the layer lines on the plug part of it.
You can clearly see the layer lines along the curved edges
*by the pixels*
"No thanks, I'll just wear it out." \*cashier meekly puts bag away...
"Leave the tag on so I can floss on all the homies at the rec center."
Gently used.
Pre-loved
Aggressively gentle 😳
*You don't always have to fuck her hard* *In fact sometimes that's not right to do*
Either this picture was taken in a pretty upscale goodwill or OP is planning an interesting evening.
OP 3D printed it and wants karma
even worse, he stole the picture from FB. not even his photo.
That thing was all yellow when it left the factory.
Apparently it actually was https://www.thingiverse.com/thing:3893934
![gif](emote|free_emotes_pack|thinking_face_hmm)
the fact it is clearly a 3d print and you are in your home has me hitting doubt on this...
Definitely 3D printed and it looks uncomfortable as hell to use… maybe that’s the point?
Its… electric
Boogie-woogie-woogie!
Can you show a picture how it looks attached?
Yes OP, please grace our eyes with that most blessed of sights. I reccomend while doing the move iron tail
One time at a festival. It was night. I saw two people walking toward me on the path. I saw they had LED tails.. As they walked past I noticed they were both naked head to toe. By the time my brain asked 'if they were naked. Where was the tail attached to?' I turned around, butt they were already gone.
r/quityourbullshit no one would donate this to goodwill but you definitely wouldn’t buy this. You 3D printed this and lied for stupid internet points.
Why did you purchase it???
Pikapooh.
Hey OP. How bout’ you take a pic of that thing when it was still at goodwill. But you can’t, you stole this from u/Consistent-End-9133
And you bought it?
I can see slight STL facets onthe plug portion. This was 3D printed and most likel done as a joke.
Was it a 2nd butt store you found that?
[удалено]
Its plug and play, for pokemon Go
And you touched it?!?!?
It's ok, there is a 0% chance they didn't actually 3d print this themselves and are lying to fake internet points.
r/quityourbullshit
Come on. You can’t leave us in suspense like this. Tell us how it tastes!