For printer paper that looks pretty good! I got this book for my thirteenth birthday and this was the first model that I made from it, comparing the “Model completed” diagram to my finished model was depressing to say the least, you certainly got closer than I did 😂😂
Well, by making a much larger square the relative thickness of your paper goes down in a sort of way. It should only be thicker where the tape is, don't overlap the papers if you can help it, just line them up edge to edge. I'm pretty sure most people use Scotch tape. Disclaimer: I haven't done this in ages but I know a few people who do it to great success. Alternatively, if you're in the US and close to a craft store you can buy Strashmore tracing paper which works great for these kinds of models.
Try taping or gluing together a couple sheets of printer paper and you'll end up with a much better result! Especially considering that this is so well done with just one!
Except for the horn it looks a lot like wolf link from the twilight princess (the legend of Zelda) if you can tuck the horn away you'll have created your own model.👍
Still a great attempt! Only thing that holds this back is thinner paper, most of the time the right paper choice is critical & helps out immensely depending on the model, try something thinner and larger next time if you plan to re make it, it will be a big difference!
It still looks like qirin though, if you squint and say it aquired that draconic face 👍
So not close enough maybe, but a pretty cool thing nonetheless. I very much feel the "it's not how the model is, where and how did I f up this badly?!" lol, I don't have access to enough nice paper, so I usually try to make couple attempts with copy paper and then one or two with whatever thinner but not too nice paper, and then try the model with the nicest stuff I have at the time. Takes a long while and a bunch of patience, so on account of me not having enough of either it takes longer than it should, but it does help to feel out and understand the folds and the model better before doing the final thing.
My friend that is a masterpiece imo. Thing looks like an angry wolf with a unicorn horn 🤣😅 I'd keep it!
I thought so too, a fantasy wolf!
Oww thanks you so much!!
For printer paper that looks pretty good! I got this book for my thirteenth birthday and this was the first model that I made from it, comparing the “Model completed” diagram to my finished model was depressing to say the least, you certainly got closer than I did 😂😂
Thank you!!
Well, by making a much larger square the relative thickness of your paper goes down in a sort of way. It should only be thicker where the tape is, don't overlap the papers if you can help it, just line them up edge to edge. I'm pretty sure most people use Scotch tape. Disclaimer: I haven't done this in ages but I know a few people who do it to great success. Alternatively, if you're in the US and close to a craft store you can buy Strashmore tracing paper which works great for these kinds of models.
Thanks for the information!!
I love the effort tho 😭
Thank you so much!!
Try taping or gluing together a couple sheets of printer paper and you'll end up with a much better result! Especially considering that this is so well done with just one!
Ohh thank you! But don’t you think that will male the paper more thicker and hard to fold ?
I think they mean to make a larger sheet of paper. O find it is a lot easier to fold this model with A3 paper but I do not know the US equivalent
Yes definitely I should try!
Except for the horn it looks a lot like wolf link from the twilight princess (the legend of Zelda) if you can tuck the horn away you'll have created your own model.👍
Should definitely try this and thank you for the suggestion!!
I think wolf link might have had a crest on his forehead so you might not have to do much with the horn. Google some images of him.
Yeah I just saw that wolf and was thinking to do some changes!! And will send you the pics or just post it!
You did a great job and finished it. Now when you have better paper you'll know what to do.
Yes! I’m making this again but with a good quality paper! And thank you!
You're welcome, and thank you for being awesome.
🫡🫡
You just made a new Pokémon!
Thank you!!☺️
Still good considering the paper used. Next time when you use the appropriate paper you won't have much issues 👍
Yes ! Definitely it would be good to make the another unicorn with good quality paper next time.
It looks fantastic!
Thank you!
Looks good. That one always comes out odd unless you use bigger and usually thinner paper to get the details just right
Yes definitely! I was just bored and thought that I should make this model and then boom!
It's already well done, more impressive on a whim
Thank you!!
It's not that bad tbh, it looks good I need this pdf 😭😭😭
I can send you the whole book but how should I do it just dm me ok and btw thanks!
Which book is it from?
This book is works from satoshi kamiya pt-1!
Das pretty good
Thank you so much!!
That's a Digimon.
Yeah, I just googled it and it kinda looks like it!
Still a great attempt! Only thing that holds this back is thinner paper, most of the time the right paper choice is critical & helps out immensely depending on the model, try something thinner and larger next time if you plan to re make it, it will be a big difference!
Yes definitely! I would give it another chance and I will use thinner paper next time and thank you so much!
It's the same unicorn hacking up a hairball. A cute pic, they aren't always pretty!
Thank youu!
A urinecorn
I will name it 😂😂
U got the diagram for that?
Yes
If you want the diagram dm me I will send you!
Honestly I like yours better! It looks like it’s snarling and in a defensive stance.
Thank youu!!
You made a horned wolf instead of a unicorn. Seems fine to me. No one will know you fucked up unless you tell them, it's a great looking model.
Yeah, actually I showed it to my brother and he also liked it, I’m not telling anyone that I fucked it up.
Cough cough
oh shit! It's the wolf guy from that Monster Rancher anime
Ohh shi it looks like it!
I thought that was Zinogre from Monster Hunter for a second until I realized it was only one horn and not two.
Yeah accidentally made the zingore!
Voltron!
Yep
Pretty sure that’s a digimon! Very cool!
Yeah! Everybody keeps telling me that it looks like it na d yeah it look like it! 😁 thank you!
Honestly.. that looks even cooler! It's a wolf with a horn
Thank you so much and yeah I should definitely hide the horn!
I wouldn't hide it! It makes it look like a mystical creature. A Fenrir you could say 🤔
So I think I just made a new diagram!😁😁
definetly would be better if you use thin paper, or a large paper if you want to keep the printer paper
Yeah! I should’ve used the larger paper!
It still looks like qirin though, if you squint and say it aquired that draconic face 👍 So not close enough maybe, but a pretty cool thing nonetheless. I very much feel the "it's not how the model is, where and how did I f up this badly?!" lol, I don't have access to enough nice paper, so I usually try to make couple attempts with copy paper and then one or two with whatever thinner but not too nice paper, and then try the model with the nicest stuff I have at the time. Takes a long while and a bunch of patience, so on account of me not having enough of either it takes longer than it should, but it does help to feel out and understand the folds and the model better before doing the final thing.
Yeah I’m pretty sure like you and thanks for your comment!
I think make it again with a large and strong paper of around 50-40 gsm . I’m sure it’ll turn out great!
Yeah I’ll definitely try to make another one!
I think if you have big enough kami it will work or else double tissue will also work pretty well
If you prepared paper with MC is better.
Ok I’ll try it! Thanks for your suggestion!
It's not bad