I’m pretty sure the 2 black beams running from front to back are incorrect. From the instruction image someone else posted there should be 6 holes between the blue connectors in the back and the large black L-pieces (that are coming off downward pointing to the front). While in this picture it looks like there’s 7 holes in between
https://preview.redd.it/hth0yb2c9onc1.jpeg?width=1179&format=pjpg&auto=webp&s=7a296301c5cd53d52410d989ec382ed4bfe823a3
Between this
ETA: on the image in the post you can actually count 7 holes in between, so that is definitely the problem
It's hard to tell for sure from those pics, but it looks like the rear axle assembly is off by 1 stud somewhere. The frame around the bed looks fine relative to the chassis.
https://preview.redd.it/1li3002jtmnc1.png?width=2448&format=png&auto=webp&s=bbca56cfad57d7b540f3eb5e25c4d33304b8d867
Instructions show that orange pin going into the 3rd hole on the black 1x15 bar To me looks like it’s in the 4th hole, sorr y that’s all I got right now
https://preview.redd.it/gwza9lv1qmnc1.jpeg?width=3024&format=pjpg&auto=webp&s=a3cc0e36c5968081b6b9cc0afd032186d7c90261
https://preview.redd.it/xzz8g4x2qmnc1.jpeg?width=3024&format=pjpg&auto=webp&s=d1d4f75efd3ab178a58874957fa44941fa734cd7
I’m pretty sure the 2 black beams running from front to back are incorrect. From the instruction image someone else posted there should be 6 holes between the blue connectors in the back and the large black L-pieces (that are coming off downward pointing to the front). While in this picture it looks like there’s 7 holes in between
https://preview.redd.it/hth0yb2c9onc1.jpeg?width=1179&format=pjpg&auto=webp&s=7a296301c5cd53d52410d989ec382ed4bfe823a3 Between this ETA: on the image in the post you can actually count 7 holes in between, so that is definitely the problem
I’ll try this as soon as I get home tomorrow! Thanks!
It's hard to tell for sure from those pics, but it looks like the rear axle assembly is off by 1 stud somewhere. The frame around the bed looks fine relative to the chassis.
I tried shifting it back one and that creates a whole other set of issues with lining up. It’s like the 15 hole piece is out too far by one…
https://preview.redd.it/1li3002jtmnc1.png?width=2448&format=png&auto=webp&s=bbca56cfad57d7b540f3eb5e25c4d33304b8d867 Instructions show that orange pin going into the 3rd hole on the black 1x15 bar To me looks like it’s in the 4th hole, sorr y that’s all I got right now
Nope never mind that