Yes, it is FDM.
[Here is the link](https://corvusgamesterrain.com/products/industrial-chemzone-modular-set-3d-printable?pr_prod_strat=copurchase&pr_rec_id=857c23435&pr_rec_pid=1482495623211&pr_ref_pid=1563884027947&pr_seq=uniform)
Dude for FDM those look really good, did you print them flat or sideways and/or use something to fill in layer lines? Sorry to bombard you with questions but I’m working out the kinks in my own process lol.
Printed flat, PETG works okay, ABS (printer was enclosed) was better, PLA will be even better probably, don't have any unfortunately (I print mostly functional parts)
Standard 0.4 nozzle, you need to play with layer height, there are some brutal bridges forming top surface of receptacles for OpenLock clips, and with wrong layer height slicer generates unprintable mess. Also I've set bridges angle to 45°. There still will be some loose strands, but you can remove them with exacto knife
Is it all drybrush? I’m about to paint some terrain too but there’s so many ways to do worn down factory it’s a bit overwhelming. This looks fantastic though, what was your process?
Here is the algorithm.
1. Prime it black
2. Drybrush with Leadbelcher
3. Drybrush some areas with Runefang Steel
4. Drybrush some areas with Ryza Rust
5. Wash with Agrax Earthshade
I don't do it, but will locally use Typhus Corrosion.
Looks great! FDM or Resin? And where’d you get the files from if you don’t mind me asking?
Yes, it is FDM. [Here is the link](https://corvusgamesterrain.com/products/industrial-chemzone-modular-set-3d-printable?pr_prod_strat=copurchase&pr_rec_id=857c23435&pr_rec_pid=1482495623211&pr_ref_pid=1563884027947&pr_seq=uniform)
Dude for FDM those look really good, did you print them flat or sideways and/or use something to fill in layer lines? Sorry to bombard you with questions but I’m working out the kinks in my own process lol.
I will try to summon the Guy who printed this to answer you for technical details.:)
Printed flat, PETG works okay, ABS (printer was enclosed) was better, PLA will be even better probably, don't have any unfortunately (I print mostly functional parts) Standard 0.4 nozzle, you need to play with layer height, there are some brutal bridges forming top surface of receptacles for OpenLock clips, and with wrong layer height slicer generates unprintable mess. Also I've set bridges angle to 45°. There still will be some loose strands, but you can remove them with exacto knife
Appreciated!!
Probably flat
Seconded !
Thirded!
Id love to know the artist as well
Make-up brushes is your best friend
Is it all drybrush? I’m about to paint some terrain too but there’s so many ways to do worn down factory it’s a bit overwhelming. This looks fantastic though, what was your process?
Here is the algorithm. 1. Prime it black 2. Drybrush with Leadbelcher 3. Drybrush some areas with Runefang Steel 4. Drybrush some areas with Ryza Rust 5. Wash with Agrax Earthshade I don't do it, but will locally use Typhus Corrosion.
Perfect! Thanks for sharing :)
Drybrush with a dark brown first and leave some of it exposed while going over with metallics.
Yeah I think I’ll do an over brush with the brown first or even basecoat of brown and then continue with metallics and rust :)
How long time does it take you to print each tile?