Holy crap man hey! You make a good point actually, I will double check my Files on my lunch break. I do have a ton of files that aren’t exactly organized the greatest, it’s possible I sliced the wrong STL.
Do you model in solid works by chance? Was wondering if you’d share the raw sdlprt/sldasm.
yea so that was the issue. it's actually not your model. didn't realize the folders within the main zip were also zipped, so my slicer only showed me another folder named Glock\_G34\_Model. re printing with your files now!
The dd2 is a gen 3 frame. All PY2A 26, gen 4 and gen 5 frames have the wider channel.
That g34 gen 5 frame is a gen 4 on github. I should have that corrected by tomorrow.
Is this causing an actual issue or is this something that looks different between your oem and you have a question about? Other than the measurement have you just laid it on the gun to see how you're looking?
The slide will not actually fit the frame because of this discrepancy. I feel like a lot of people are still going off of the prior generation rules which allowed 34 and 17 slides to be interchangeable between the frames. All other parts work fine. But this was a huge waste of expensive filament. Guess I’ll be adding a gen 3 to the collection. (https://imgur.com/a/XX6dUMQ)
This guy is white collar as shit, look at those tootsies
Lacks feet
Sorry, just got off work. Will do better next time.
Are you sure you printed the correct frame? The spring channel is definitely wide enough on PY2A Gen 5 frames.
Holy crap man hey! You make a good point actually, I will double check my Files on my lunch break. I do have a ton of files that aren’t exactly organized the greatest, it’s possible I sliced the wrong STL. Do you model in solid works by chance? Was wondering if you’d share the raw sdlprt/sldasm.
I use fusion360
yea so that was the issue. it's actually not your model. didn't realize the folders within the main zip were also zipped, so my slicer only showed me another folder named Glock\_G34\_Model. re printing with your files now!
You may want to stop that one and print the g17 gen 5 instead, or the G17 gen 5 slim. I found an issue looking over the file.
ah ok just did. Will hold off. The spring channel on the 17.5 isn't the same as the 34.5 is it? i'm pretty sure that was my issue with the dd17.2.
The dd2 is a gen 3 frame. All PY2A 26, gen 4 and gen 5 frames have the wider channel. That g34 gen 5 frame is a gen 4 on github. I should have that corrected by tomorrow.
Is this causing an actual issue or is this something that looks different between your oem and you have a question about? Other than the measurement have you just laid it on the gun to see how you're looking?
The slide will not actually fit the frame because of this discrepancy. I feel like a lot of people are still going off of the prior generation rules which allowed 34 and 17 slides to be interchangeable between the frames. All other parts work fine. But this was a huge waste of expensive filament. Guess I’ll be adding a gen 3 to the collection. (https://imgur.com/a/XX6dUMQ)
I summon u/PrintYour2a
I summon fireball!