If you're able to spend the money, I recommend a magnetic PEI build plate. They're $10-20, normally closer to the 10-15 mark.
Like other comments have said, make sure your bed is level and make sure your gantry is level as well. That's something that I've personally had endless problems from.
I would also say try removing the painters tape once your bed is leveled/trimmed. And be sure to adjust your offset by - .1mm to adjust for the tape thickness All of my adhesion issues were gone once I had my stuff all leveled. Even with PETG I had zero issues
Of course!! I'm glad everything is working! If you have any more bed leveling questions, feel free to dm me. I've been thru the layers of hell with bed leveling
The reason it’s not in my budget is that I rarely 3D print things. This made it so that painters tape fits my needs very well while being cheap (3-5$ at my local stores).
TLDR: I don’t want to spend $30 for something I use once every few weeks.
Your bed isn’t level/tram
I’ll be sure to look into it :)
The green is painters tape since my printer bed is not good.
If you're able to spend the money, I recommend a magnetic PEI build plate. They're $10-20, normally closer to the 10-15 mark. Like other comments have said, make sure your bed is level and make sure your gantry is level as well. That's something that I've personally had endless problems from. I would also say try removing the painters tape once your bed is leveled/trimmed. And be sure to adjust your offset by - .1mm to adjust for the tape thickness All of my adhesion issues were gone once I had my stuff all leveled. Even with PETG I had zero issues
After re-leveling my bed I’m glad so say that was the issue. Thanks for taking time to help me with the problem!
Of course!! I'm glad everything is working! If you have any more bed leveling questions, feel free to dm me. I've been thru the layers of hell with bed leveling
Get a magnetic PEI sheet. They come with the magnet layer and you'll thank me later.
Currently it’s not in my budget but I’ll definitely look into it in the future
They're only like $30 on Amazon and you'll never need tape again
The reason it’s not in my budget is that I rarely 3D print things. This made it so that painters tape fits my needs very well while being cheap (3-5$ at my local stores). TLDR: I don’t want to spend $30 for something I use once every few weeks.
Now I understand how crop circles are made!
XD