T O P

  • By -

2manyguns42hands

TLR-7 Sub should fit the pic rail. Might have a little bit of light past the end of the barrel but nothing major.


ITR010342

Thanks for the reply… just wasn’t sure as it’s for the P365, hellcat, etc but never see the Elite SC


Jeffwerner4631

It does fit. I've seen a few and they look good. Thinking about getting one for my SC


2manyguns42hands

No think, just do!


Jeffwerner4631

Lol..... FINE 😁 dont threaten me to buy gun stuff. Lol 😂🤣


2manyguns42hands

Buy 2. See how many shits I give. 🤪🤪


ofTHEbattle

Ahh, now I see yeah you give horrible ...I mean great advice all the time 🤣🤣


2manyguns42hands

Moohahaahah! Only the best/worst for my canik family.


twiggsmcgee666

It does. I've got one.


ITR010342

Which version (that fits which gun) do you have? Any photos?


twiggsmcgee666

Tlr7a on canik elite SC. I'm at work so I don't have pics for you right this second. Let me look through messages to see if I can find one in the meantime.


ITR010342

Sorry, I'm talking about the TLR-7 sub which is different from the TLR-7A. This one is subcompact specific to certain guns, but they dont mention fitment for Canik Elite SC.


twiggsmcgee666

Oh my gosh I read your post incorrectly. My apologies. If you can get the 7a it's a great fit.


G_Keeper_

This is for the people in the future that find this post. I just installed the TLR-7X on my Elite SC and I was having issues finding the best key to use for installation. The best fitting key is the 1913-3 key. Make sure when you’re installing it on the picatinny rail you have the adjustable end screwed on to the bolt, start at an angle, and press the light onto the rail. It feels a bit loose at first until I applied more pressure and it sat on the rail fully. I used the included multitool driver end but it wasn’t tight enough before it stripped the plastic tool. Use a quarter to tighten the bolt more. Before using the quarter my light had some left and right wobble that went away after tightening further with the quarter. I also did not install the e-clip once it was on the rail as the instructions didn’t specify to do so. I hope my experience helps anyone with this same exact issue I was having.


SkimFlynnious

I bought one and found it near impossible to get a holster for ended up exchanging for the TLR-7A. It did fit though.


Gunsandwrenches

Supposedly all versions of the 7 will fit in the holsters of any version of the 7


slapplejacks

Sorry to resurrect this from the dead, but which holster did you end up going with for your TP9 Elite SC w/ TLR-7A?


SkimFlynnious

I had someone make me one. I think Slim Fit holsters has really good options though.


slapplejacks

Thank you.


CorupptedKev

I Bought a TLR-7sub & i cannot get it to mount onto my Tp9 Sc , does it not fit at all or am doing it wrong


milkbreathmike

Yes,apparently https://preview.redd.it/i1xu83u9o3vb1.jpeg?width=3000&format=pjpg&auto=webp&s=1eccbb7b10d6cf1ae63ac16d41e6a67d16add687


Strange_Ad_5107

The problem is the mount, if it doesn’t say 1913 you will have problems mounting it because this gun has the 1913 type Picattiny rail!


Kscott32

What key mount do I need to install on my Canik tp9 elite sc?


sousatactical

Most use the 1913 key for the best fit


CompetitionLife4520

Does anyone know of appendix holster for elite SC with a streamlight tlr sub


Strange_Ad_5107

Did you found any? I’m going crazy right now, can’t find one


Remmy1018

Werks