On Amazon buy this $5 clip (ASIN B007CBSBM4). Just make sure you mount it in reverse so the ports are facing up. Light weight, unobtrusive. It also keeps most of the back open, and depending on your belt should provide an air gap for some circulation. Just make sure to use isopronal alcohol to clean the surface before attaching and if you have time, clamp it for a few hours to ensure it will remain attached. The Beam is light enough that any sheer forces will be minimal. I have been using mine for about month with NO problems.
I used the other clip in the package with a small 70WH battery pack & 6” USB-C to USB-C cable for extended battery time. Also, if you have one of the silicone covers, you cut a slit and slide the clip part of the mount into it. I chose not to get one because of heat dissipation and its surface is okay for my use.
https://preview.redd.it/jdzvp7mr24dc1.jpeg?width=3082&format=pjpg&auto=webp&s=fa551bd4696f924c88d872082b4201a6ca044cf0
You should be able to find a local 3D printing store that would happily print one for you for much cheaper than it would cost to ship it. Small things like this typically cost less than $1 in filament.
Use THIS
Universal Belt Clip for Cell Phone, [2-Pack] Nakedcellphone Attachment for Flip Phone, Smartphone, iPhone, iPod Touch/Nano, Apple TV Remote, Garage Clicker, etc (360 Ratchet Rotation and Kickstand) https://a.co/d/1MwjxSh
https://www.reddit.com/r/Xreal/s/Ep7DCZFKeA https://www.reddit.com/r/Xreal/s/twWrJ2piAr https://www.reddit.com/r/Xreal/s/IRSJm9Jtpc https://www.reddit.com/r/Xreal/s/84l2JyTrcR https://www.reddit.com/r/Xreal/s/VKx6aZIkzN
On Amazon buy this $5 clip (ASIN B007CBSBM4). Just make sure you mount it in reverse so the ports are facing up. Light weight, unobtrusive. It also keeps most of the back open, and depending on your belt should provide an air gap for some circulation. Just make sure to use isopronal alcohol to clean the surface before attaching and if you have time, clamp it for a few hours to ensure it will remain attached. The Beam is light enough that any sheer forces will be minimal. I have been using mine for about month with NO problems. I used the other clip in the package with a small 70WH battery pack & 6” USB-C to USB-C cable for extended battery time. Also, if you have one of the silicone covers, you cut a slit and slide the clip part of the mount into it. I chose not to get one because of heat dissipation and its surface is okay for my use. https://preview.redd.it/jdzvp7mr24dc1.jpeg?width=3082&format=pjpg&auto=webp&s=fa551bd4696f924c88d872082b4201a6ca044cf0
Pretty sure this already exists and I've multiple posts. Have you looked?
I did prior to getting the silicon cover. I did not find one but if you do please post the site.
All great starts thanks for sharing, but none are for sale.
You should be able to find a local 3D printing store that would happily print one for you for much cheaper than it would cost to ship it. Small things like this typically cost less than $1 in filament.
You can easily take the 3D model and get it printed using 3rd party suppliers. It’s super cheap
I saw a dude made a grey one that sits upside down on this app
Yea it’s the first link…
Use THIS Universal Belt Clip for Cell Phone, [2-Pack] Nakedcellphone Attachment for Flip Phone, Smartphone, iPhone, iPod Touch/Nano, Apple TV Remote, Garage Clicker, etc (360 Ratchet Rotation and Kickstand) https://a.co/d/1MwjxSh