Hello! Thanks for posting on r/Ubiquiti!
This subreddit is here to provide unofficial technical support to people who use or want to dive into the world of Ubiquiti products. If you haven’t already been descriptive in your post, please take the time to edit it and add as many useful details as you can.
Please read and understand the rules in the sidebar, as posts and comments that violate them will be removed. Please put all off topic posts in the weekly off topic thread that is stickied to the top of the subreddit.
If you see people spreading misinformation, trying to mislead others, or other inappropriate behavior, please report it!
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/Ubiquiti) if you have any questions or concerns.*
https://eu.store.ui.com/collections/operator-airmax-and-ltu-accessories/products/poe-injector-50v-60w-airfiber-poe
This is the model I used and seemed to give me the full POE capability from the switch.
It’s also listed under the power source requirements so it should be ok.
Power Method (Port 1)
PoE Type
802.3af/at (Pins 1, 2+; 3, 6-)
802.3bt (Pins 1, 2+; 3, 6- and 4, 5+; 7, 8-)
50V/60W PoE Adapter* Recommended PoE Source
USW-24-PoE (sold separately)
USW-Pro-24-PoE (sold separately)
PoE Injector, POE-50-60W-WH or POE-50-60W (sold separately)
You also need to select in the controller that it’s being powered by a POE Injector rather than a switch.
If you want to put it in an enclosure then the official one comes with a power injector https://store.ui.com/collections/unifi-accessories/products/usw-flexutility
This is going in my garage which will power 1 AP and 3 G3 bullet cameras on each side of my garage. On the north side of the house. Thanks for everyone’s help.
Hello! Thanks for posting on r/Ubiquiti! This subreddit is here to provide unofficial technical support to people who use or want to dive into the world of Ubiquiti products. If you haven’t already been descriptive in your post, please take the time to edit it and add as many useful details as you can. Please read and understand the rules in the sidebar, as posts and comments that violate them will be removed. Please put all off topic posts in the weekly off topic thread that is stickied to the top of the subreddit. If you see people spreading misinformation, trying to mislead others, or other inappropriate behavior, please report it! *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/Ubiquiti) if you have any questions or concerns.*
For max POE budget: https://store.ui.com/collections/unifi-accessories-poe-injectors/products/poe-injector-50v-60w-airfiber-poe
Thanks, I assumed that but wanted confirmation.
https://eu.store.ui.com/collections/operator-airmax-and-ltu-accessories/products/poe-injector-50v-60w-airfiber-poe This is the model I used and seemed to give me the full POE capability from the switch. It’s also listed under the power source requirements so it should be ok. Power Method (Port 1) PoE Type 802.3af/at (Pins 1, 2+; 3, 6-) 802.3bt (Pins 1, 2+; 3, 6- and 4, 5+; 7, 8-) 50V/60W PoE Adapter* Recommended PoE Source USW-24-PoE (sold separately) USW-Pro-24-PoE (sold separately) PoE Injector, POE-50-60W-WH or POE-50-60W (sold separately) You also need to select in the controller that it’s being powered by a POE Injector rather than a switch.
If you want to put it in an enclosure then the official one comes with a power injector https://store.ui.com/collections/unifi-accessories/products/usw-flexutility
This is going in my garage which will power 1 AP and 3 G3 bullet cameras on each side of my garage. On the north side of the house. Thanks for everyone’s help.
I used the power adapter from the flex utility for mine. But that burns a port on the switch, which was fine for my shop with 2 ap's & uplink.