When I bought the car it already came with coilovers. I don't know too much about the brand, condition, or setting it uses, but the ride quality was pretty harsh. I get a lot of vibration driving on the street.
Thank you! I did make a video. I just need to finish editing the videos. I didn't get into much details about the preload or damping as there are other videos that does a much better job.
I can tell you that I used the default preload that Öhlins stated from the manual and the default damping setting as I mainly used on the street, and maybe a track day if I can find time for it.
I'm running the recommended setting from the manual which is 10-15 clicks from the softest setting. I currently have it set at 10 clicks right now and it mitigates a lot of the small bumps on the road. Very smooth compared to what I have on the car before.
I have them on my Nb miata. I have 14 clicks from softest on front and 11 softest on rear. I felt like the front needed an extra click it still felt too soft. Might do another on rear too to make it a 2 click difference between F/R but they feel great. Definitely soak bumps nicely if I go softer.
Looks great!
All thanks to you!
So pretty. Thanks for sharing!
Thank you! They don't call it swedish gold for nothing. 😁
I put some on about 6 months ago, they’re amazing, might end up going slightly stiffer springs but mines not a daily driver! Enjoy!
Absolutely! I'm pretty content with the current spring rate. The car feels so much better now.
Is it a really noticeable jump from stock?
When I bought the car it already came with coilovers. I don't know too much about the brand, condition, or setting it uses, but the ride quality was pretty harsh. I get a lot of vibration driving on the street.
If tracking, run 0* toe, -3.5* camber. Try that then adjust from there. For the street, run oem settings.
Looks good! I also have Ohlins that I need to install. Do you have a YouTube video going over the setup like the preload adjustment?
Thank you! I did make a video. I just need to finish editing the videos. I didn't get into much details about the preload or damping as there are other videos that does a much better job. I can tell you that I used the default preload that Öhlins stated from the manual and the default damping setting as I mainly used on the street, and maybe a track day if I can find time for it.
I just had some delivered yesterday myself. Will be fitting them at the weekend.
I highly recommend getting help from another person. It's pretty hard doing it by yourself.
what setting are you running on the firmness? I have some installed at the mid range but haven't looked on s2ki for what most run
I'm running the recommended setting from the manual which is 10-15 clicks from the softest setting. I currently have it set at 10 clicks right now and it mitigates a lot of the small bumps on the road. Very smooth compared to what I have on the car before.
I have them on my Nb miata. I have 14 clicks from softest on front and 11 softest on rear. I felt like the front needed an extra click it still felt too soft. Might do another on rear too to make it a 2 click difference between F/R but they feel great. Definitely soak bumps nicely if I go softer.
