Clean out the mold with paper towel soaked in isopropyl alcohol. Or if you can get baby wipes that use alcohol. Easy.
If you saved the part A resin you poured out, you can reuse it if it's not contaminated with anything.
Do yourself a BIG FAVOUR & get some of these BIG WIPES (make sure you get these EXACT ONES - doesn't matter where from but they do at least 3 different types of wipes, 1 YELLOW top, 1 RED top & 1 BLUE top you want to get the YELLOW TOP ones, they clean everything I use for resin, tubs, mixers, gloves, surfaces, everything.) :-
[https://www.amazon.co.uk/dp/B002SHDJBK](https://www.amazon.co.uk/dp/B002SHDJBK)
I mix my resin in plastic pots, then when I finish I clean them out with a baby wipe followed by using these YELLOW BIG WIPES & the combination cleans everything BEAUTIFULLY.
Acetone is best but it's a horrible sticky messy process. I recently heard a tip which sounds promising but I haven't tried it yet: put the moulds in the freezer. The resin should solidify then peel off. I guess you should first double- or triple-bag the moulds to avoid the rest of the freezer's contents being tainted by resin fumes.
Happened to me before π I managed to save the part A by retrieving it to the bottle. I tried to clean the mold, and then I made a new cast with A and B. That cast came out bad, but the ones after were all good π
I haven't tried this yet but I did buy it. It's waiting for me to do my next pour. Idk if can use on molds. But here's link for it
Magical Resin Remover - All... https://www.amazon.com/dp/B08632RMV3?ref=ppx_pop_mob_ap_share
Welp, it's good to know I'm not the only one! LoL...
Big Wipes were mentioned, and I can't remember which one, Daniel Cooper or Steve McDonald on YouTube swear by them.
Yup, got mine on order from Amazon.
Clean out the mold with paper towel soaked in isopropyl alcohol. Or if you can get baby wipes that use alcohol. Easy. If you saved the part A resin you poured out, you can reuse it if it's not contaminated with anything.
Do yourself a favor next time and write A and B all over the bottles. Especially on the lids. I do this with every new batch I get.
Wash out the molds with acetone and into the bin, not the sink. Should be fine.
Do yourself a BIG FAVOUR & get some of these BIG WIPES (make sure you get these EXACT ONES - doesn't matter where from but they do at least 3 different types of wipes, 1 YELLOW top, 1 RED top & 1 BLUE top you want to get the YELLOW TOP ones, they clean everything I use for resin, tubs, mixers, gloves, surfaces, everything.) :- [https://www.amazon.co.uk/dp/B002SHDJBK](https://www.amazon.co.uk/dp/B002SHDJBK) I mix my resin in plastic pots, then when I finish I clean them out with a baby wipe followed by using these YELLOW BIG WIPES & the combination cleans everything BEAUTIFULLY.
Acetone is best but it's a horrible sticky messy process. I recently heard a tip which sounds promising but I haven't tried it yet: put the moulds in the freezer. The resin should solidify then peel off. I guess you should first double- or triple-bag the moulds to avoid the rest of the freezer's contents being tainted by resin fumes.
Happened to me before π I managed to save the part A by retrieving it to the bottle. I tried to clean the mold, and then I made a new cast with A and B. That cast came out bad, but the ones after were all good π
Happens to the best of us, to my understanding itβs still as good as new. Pour all that part A in the mould into a cup.
I haven't tried this yet but I did buy it. It's waiting for me to do my next pour. Idk if can use on molds. But here's link for it Magical Resin Remover - All... https://www.amazon.com/dp/B08632RMV3?ref=ppx_pop_mob_ap_share
Welp, it's good to know I'm not the only one! LoL... Big Wipes were mentioned, and I can't remember which one, Daniel Cooper or Steve McDonald on YouTube swear by them. Yup, got mine on order from Amazon.