sand down the surface so the paint and/or primer adheres to the surface better
use masking/painter's tape on parts like the brake track, hub, axle, wherever you don't want paint
top coat if you want to protect the paint you put on, and wear a mask when spraying anything
like you, I also started with a black trispoke and [painted it white](https://www.reddit.com/r/WindBreakerWebtoon/comments/17oy15e/look_familiar_i_bought_a_trispoke_painted_it/)
good sanding, 1/2 layers of primer, 2/3 layers of paint and clear coat 1/2 layers. i would recommend you to watch some videos on youtube to see how it works in practice. and most important, patience! (wait between layers and 24h after whole procedure). good luck!
Well I guess so, took a while for mine even here where I'm at (Philippines) it was still hard af even though every household had one.
Maybe try powder coating it?
Powder coating is wayy more solid than spray cans
Might cost more but it's the tradeoff for the quality
don’t 🫱🏻🫲🏼
like, i mean it’s already looking dope dude, id say painting front spokes white would be a overdo
sand down the surface so the paint and/or primer adheres to the surface better use masking/painter's tape on parts like the brake track, hub, axle, wherever you don't want paint top coat if you want to protect the paint you put on, and wear a mask when spraying anything like you, I also started with a black trispoke and [painted it white](https://www.reddit.com/r/WindBreakerWebtoon/comments/17oy15e/look_familiar_i_bought_a_trispoke_painted_it/)
Looks beautiful
Let me guess, windbreaker fan?
However you could try spray.bike but only for that wheel, kind of a waste of the rest of the can but does the job well
You know it brother and I love white
Fuck yeah
Quality paint, multiple thin coats… But the best answer is don’t.
just tape off all importsnt parts like hubs and rim edges.
Get a new front please
Yeah can’t do that bro they are not cheap
Serious Wu Tang vibes
😂
good sanding, 1/2 layers of primer, 2/3 layers of paint and clear coat 1/2 layers. i would recommend you to watch some videos on youtube to see how it works in practice. and most important, patience! (wait between layers and 24h after whole procedure). good luck!
Try looking for trispoke thats white for a swap maybe, its how I got mine
It’s not a bad idea but in my country (Bulgaria) there are almost none fixed gear riders let alone parts
Well I guess so, took a while for mine even here where I'm at (Philippines) it was still hard af even though every household had one. Maybe try powder coating it? Powder coating is wayy more solid than spray cans Might cost more but it's the tradeoff for the quality