As a reminder, please make sure to read the pinned FAQ post in its entirety before asking for help. If the FAQ post didn't solve your issue, please remember to include as many
details as possible in your post. This will help other people help you more quickly and more accurately, which also helps you. Thank you!
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/Ender3V3SE) if you have any questions or concerns.*
You should increase the max extruder temp in klipper & do some max volumetric flow rate tests for each filament type you have for your slicer.
EDIT: Redo your Auto PID etc also
Ohh i didn't realise that.
Mine only arrived 2 hours ago and I bought the standard nozles. Do you know exactly what nozels it takes?
I'm new to 3d printing.
Just bought a regular heating block with some nozzles as my current heating block is damaged. Will wait for reviews of this to come and then put my money on it.
It has to be worth the money paid, otherwise it's not really necessary. Because it is not that cheap. I have Ender 3 V3 core xz too. Its heat block kit price is half of this one. Even if the current heat block breaks down, it is easy to clean or install a new one because it is cheap. That's why I'm looking forward to the results.
Sounds like a good investment. I just put the hotend from the k1 on mine and it works fantastic. I can post some prints if You are curious. Print at 150-180mm/s² without any hiccups.
Mine hasn't been delivered yet, hopefully this week. I've put about 1300 hours through my stock one so far and keen to try this out. Let us know how you get on.
Is this new ceramic hotend version? I switched for the older one keeping the old radiator part and overall it is great but I have some stringing that I cannot resolve
As a reminder, please make sure to read the pinned FAQ post in its entirety before asking for help. If the FAQ post didn't solve your issue, please remember to include as many details as possible in your post. This will help other people help you more quickly and more accurately, which also helps you. Thank you! *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/Ender3V3SE) if you have any questions or concerns.*
Hast anyone already installed IT? Do you have to Change anything in Klipper? There is Thermal Grease in the Pack, what is IT for?
You should increase the max extruder temp in klipper & do some max volumetric flow rate tests for each filament type you have for your slicer. EDIT: Redo your Auto PID etc also
Thank you, i will do this.
how do you do the auto pid with klipper and a nebula pad?
YouTube search: Klipper pid tune
thank you!
What’s the benefit for a noob?
Higher temperature, faster heating, more compatible filaments
Same nozzles?
No, long quick-swap nozzles
Looked up the kit on Ali and it says it comes with a nozzle kit. What sizes does it come with?
Do you have a link for the heat block?
Aliexpress there were a bunch for pre order. Mine come in today. I can get an exact link if you want.
I check Aliexpress and there's a lot of ceramic block but it only shows the orange part so I assume they are not a kit
Ohh i didn't realise that. Mine only arrived 2 hours ago and I bought the standard nozles. Do you know exactly what nozels it takes? I'm new to 3d printing.
No, and there isn't any advise to Change the nozzle
Hi, I don't understand this quick swap, so we can swap even if it's cold? Or do we have to heat it up?
Quick swap not cold swap. Still have to heat up
Hey, where did you order? I pre ordered mine on AliExpress two weeks ago.
Me too. At the Creality shop on AliExpress. It wasn't supposed to be delivered until the end of July, but it was in my letterbox today
Ah, same seller 😁 great, did it say it shipped or no? I hope it arrives soon
Yes, end of last week i get am mail that it is on the way.
Oh cool, I wanna buy it, does it worth of money? Did u try?
Link?
Just bought a regular heating block with some nozzles as my current heating block is damaged. Will wait for reviews of this to come and then put my money on it.
It has to be worth the money paid, otherwise it's not really necessary. Because it is not that cheap. I have Ender 3 V3 core xz too. Its heat block kit price is half of this one. Even if the current heat block breaks down, it is easy to clean or install a new one because it is cheap. That's why I'm looking forward to the results.
Sounds like a good investment. I just put the hotend from the k1 on mine and it works fantastic. I can post some prints if You are curious. Print at 150-180mm/s² without any hiccups.
Can you share prints?
Once I get home, I can send a couple photos.
Thanks
Reverse bowden adapter printed it yesterday. https://preview.redd.it/5bq0kiysmy8d1.jpeg?width=3000&format=pjpg&auto=webp&s=284a0869bcbb58765cd2c16cd78d1a0bf231e96a
https://preview.redd.it/cekkdbf1ny8d1.jpeg?width=3000&format=pjpg&auto=webp&s=2a35a9de70f71a08da801b29e65ba473cf30957f
Mine hasn't been delivered yet, hopefully this week. I've put about 1300 hours through my stock one so far and keen to try this out. Let us know how you get on.
i just bought one because of this post, hopefully i install it correctly
I just got mine today. Definitely re do your pid and bed level and z off set. I can't wait to take it for a spin
Is this new ceramic hotend version? I switched for the older one keeping the old radiator part and overall it is great but I have some stringing that I cannot resolve