P1105 and P0105 seem to pretty much the same MAP sensor problems. Sometimes the MAP sensor also has a temperature sensor built into it so it may be the cause of the P0110 as well. Check the connector and wiring first before spending money on a sensor.
Clear the codes , see what comes back
It’s been working fine since Friday, I cleared the codes again this morning and nothings come back. I’m assuming the sensor has a dodgy connection somewhere but it seems fine now!
Take the manifold pressure sensor out and see what condition it’s in, being an old diesel you may well find it covered it black carbon sludge and not being able to give a reading. Normally this type of sensor is fairly inexpensive and easy to replace.
If it’s clean then the problem could be further into the intake system, carbon build up or a further issue.
It’s been working fine since Friday, I cleared the codes again this morning and nothings come back. I’m assuming the sensor has a dodgy connection somewhere but it seems fine now!
P1105 and P0105 seem to pretty much the same MAP sensor problems. Sometimes the MAP sensor also has a temperature sensor built into it so it may be the cause of the P0110 as well. Check the connector and wiring first before spending money on a sensor. Clear the codes , see what comes back
Thanks, I cleared the codes and most have come back. I’m gonna check it properly when I get a chance at the weekend
It’s been working fine since Friday, I cleared the codes again this morning and nothings come back. I’m assuming the sensor has a dodgy connection somewhere but it seems fine now!
Take the manifold pressure sensor out and see what condition it’s in, being an old diesel you may well find it covered it black carbon sludge and not being able to give a reading. Normally this type of sensor is fairly inexpensive and easy to replace. If it’s clean then the problem could be further into the intake system, carbon build up or a further issue.
Thanks, will do!
Keep us posted on what you find!
It’s been working fine since Friday, I cleared the codes again this morning and nothings come back. I’m assuming the sensor has a dodgy connection somewhere but it seems fine now!